Couldn't load pickup availability
Returns Policy, Shipping & Customer Service
Returns Policy, Shipping & Customer Service
-
We know you’ll love this sewing pattern as much as we do. If you aren't satisfied with the paper pattern version you have 30-days from receipt to return it. Please see our refund policy for more details;
-
We dispatch 4 times a week: Tuesday, Thursday, Friday & Sunday. For more details see our Shipping Policy. Please be aware customs processing may affect delivery estimates and are outside of our control.
-
Our international shipping is at a reduced rate, and is based on weight - so multiple pattern orders are cost effective. If you would like to discuss the shipping cost, please contact us.
-
You can contact us about your pattern at any time by emailing us; vintagepatternssewbeeit@gmail.com and we promise to respond within 24 hours.
Original Fitted Jacket Pattern
This fitted Couturier jacket has a small shaped collar, vertical welts and long two-piece fitted sleeves. The very slim four-piece skirt with front and back seams opens at the hem. The full- length coat has a slightly flared back, a large shaped collar, two vertical welt pockets and long straight sleeves.
A genuine vintage sewing pattern that may have been used and has been counted and verified complete along with the instruction sheet. Instruction sheets are present. There are some hairline tears to seams and back of envelope.
Size Guide
Size Guide
Bust: 32" (81cm)
Waist: 26" (66cm)
Hips: 35"(89cm)
Sewing Notions
Sewing Notions
Matching thread
Fabric Amount Guide
Fabric Amount Guide
Material Required (Without Nap|)
Hems Allowed
Length of Cost at Centre-Back from Natural Neck-line, 47 ½”
Length Jacket at Centre-Back from Natural Neck-line, 25 ¾”
Length of Skirt at Centre-Front from Waistline, 30 ¾”
Coat
54" Material, 3 yds.
Coat Lining and Suit
54" Material, 4 7/8 yds.
Suit
54" Material, 2 5/8 yds.
Coat Lining
54" Material, 2 7/8 ds.
Jacket Lining
39" Material, 2 yds.
Coat Pocket
39" (Lining), ¼ yd.
Interfacing for Coat
25", 1 ¾ yds.
35", 1 3/8 yds.
NOTE: For interfacing use canvas, hair cloth or pre-shrunk muslin.
Select according to weight of fabric.
Interfacing for Jacket
25" or 35", 7/8 yd.
NOTE: For interfacing size canvas, haircloth or pre-shrunk muslin.
Select a according to weight of fabric.
7" Skirt Placket Fastener
Width at lower edge of coat in size 16 is 66 1/2" (about 1 7/8 yds.).
Width at lower edge of skirt in size 16 is 46" (about 1/4 yds.).
| Without nap or pile, or with design in both directions.
Shoulder Pads for Coat and Jacket: Cotton waddling for padding and 1/4 yd. of 39" material for facing.
Above requirements do not allow for shrinkage
Yardage does not allow for matching squares when a plaid fabric is used.
Diagonal fabrics are not suitable for this design.
Imperial to Metric Conversion Guide
Imperial to Metric Conversion Guide
Yards to Centimeter
| Imperial | Metric |
|---|---|
| ⅛ yard | 11.4cm |
| ¼ yard | 22.9cm |
| ⅓ yard | 30.5cm |
| ⅜ yard | 34.3cm |
| ½ yard | 45.7cm |
| ⅝ yard | 57.2cm |
| ⅔ yard | 61cm |
| ¾ yard | 68.6cm |
| 1 yard | 91.4cm |
| 1¼ yard | 114.3cm |
| 1½ yard | 137.2cm |
| 1¾ yard | 160cm |
| 2 yards | 182.9cm |
| 2¼ yards | 205.7cm |
| 2½ yards | 228.6cm |
| 2¾ yards | 251.5cm |
| 3 yards | 274.3cm |
| 3½ yards | 320cm |
| 4 yards | 365.8cm |
Inches to Millimeters/Centimeter
| Imperial | Metric |
|---|---|
| ⅛" | 3mm |
| ¼" | 6mm |
| ⅓" | 8mm |
| ⅜" | 10mm |
| ½" | 12mm |
| ⅝" | 16mm |
| ⅔" | 17mm |
| ¾" | 19mm |
| 1" | 2.5cm |
| 1¼" | 3.2cm |
| 1½" | 3.8cm |
| 1¾" | 4.4cm |
| 2" | 5.1cm |
| 2¼" | 5.7cm |
| 2½" | 6.4cm |
| 2¾" | 7.0cm |
| 3" | 7.6cm |
| 3¼" | 8.25cm |
| 3½" | 8.9cm |
| 4" | 10.2cm |
| 4½" | 11.4cm |
| 5" | 12.7cm |
| 5½" | 14cm |
| 6" | 15.2cm |
| 7" | 17.8cm |
| 8" | 20.3cm |
| 9" | 22.9cm |
| 10" | 25.4cm |
| 11" | 28cm |
| 12" | 30.5cm |
Roll Width (Inches to Centimeters)
| Imperial | Centimeters |
|---|---|
| 35" | 88.9cm |
| 36" | 91.44cm |
| 38" | 96.52cm |
| 39" | 99.06cm |
| 42" | 106.68cm |
| 48" | 121.92cm |
| 54" | 137.16cm |
Seam Allowances
| Imperial | Metric |
|---|---|
| ¼" | 6mm |
| ⅜" | 10mm |
| ½" | 12mm |
| ⅝" | 16mm |
| ¾" | 19mm |
Recommended Fabrics
Recommended Fabrics
Cottons, Broadcloth, Chambray, Linen. Diagonal fabrics are not suitable for this design. See our Fabric Partners
Skill Level
Skill Level
Intermediate
What You Will Receive
What You Will Receive
If you choose to purchase the original pattern, you receive a piece of history which will include age-related wear and tear.
